SUNRASERG 220V CONTROLLER KIT is a solar controller for solar hot water systems. It is a standard differential controller used to turn a solar hot water system on and off via pump controls.
This solar controller can be used to monitor and operate the solar thermal systems via the relay controls used to operate the solar pump and heater. The pump is activated when one of the three temperature sensors shows there is heat to be collected in the solar array. This solar controller allows for maintenance free operation of your solar thermal system. This solar controller is also equipped with an easy to read display.
Sunraserg solar controller is the ideal choice for large and small systems alike.
- Inputs: 1 x Pt1000 sensor (≤ 500 Cel. degree) for solar collector (silicon cable≤280Cel. degree),
- 2 x NTC10K, B3950 sensor (≤ 135Cel. degree) for tank, (PVC cable ≤105Cel. degree),
- Outputs: 3 relays, for circulation pumps or 3-way electromagnetic valve, 1 relay for electrical heater
- 1 x controller
- 1 x display unit
- 1 x UK plug
The solar circuit pump (R1) is switched on as soon as the switch-on temperature difference (△T on) between the collector array (T1) and the storage tank (T2) is reached.
If the temperature difference between the collector array (T1) and storage tank (T2) drops below the switch-off temperature difference (△T off), , or the temperature of storage tank (T3) reaches the preset maximum storage temperature, then the solar circuit pump (R1) is switched off.
Back-up heating by auxiliary boiler: within the preset time section of back-up heating, if the temperature T3 is below the switch-on temperature, then the circulation pump ( H1) of back-up heating is triggered, when T3 is heated to the switch-off temperature, circulation pump H1 of back-up heating is ceased.
Main technical data:
- Controller dimension: 218mm×165mm×55mm
- Display dimension: 120mm x 120mm x 18mm
- Power supply: AC100V-240V
- Power consumption: ＜ 2W
- Accuracy of temperature measuring: ± 2 Cel. degree
- Range of collector temperature measuring: -10～220Cel. degree
- Range of tank temperature measuring: 0～110 Cel. degree
- Suitable power of pump: 3 pcs，≤ 150W
- Suitable power of electrical heater: 1 pcs, Max. Current: 10A (@110VAC, for 750W electrical heater, @230VAC, for 1500W electrical heater)
- Ambient temperature: -10～50 Cel. degree
- Protection class: IP40